PAJ POWER Finder 4G Instrucciones De Uso página 15

2.2 Product description
LED signals
2.3 Instructions for charging
Before starting your device for the first time you should charge it for about 8 to 12
hours. Connect the charging cable, which you will first connect to the USB Wall
plug adapter, to the device's charger port. Once you plug everything and your
device is connected to the power source, charge it until the red LED light turns off.
NOTE!
The POWER Finder 4G offers you approximately 90 days of operation without any
in-between charging! However, it should be noted that the duration depends on
the load. The more the FINDER is moved and the more alerts are sent, the higher
the utilization.
28
USB port
ON/OFF button
SIM card slot
(SI
M card is already
inside your FINDER and
is not replaceable)
2.4 Activation
In order to use your POWER Finder 4G, you will need to previously activate
it online. Enter the following link and follow the instructions:
start.finder-portal.com
NOTE!
For a detailed explanation of the activation process,
you can simply click on the following link or scan the
QR code:
paj-gps.de/registrierung/
29