Safety information
Unpacking the appliance
WARNING! Packaging material (e.g. film, polystyrene foam) can be dangerous for children.
Risk of suffocation! Keep all packaging out of the reach of children.
1. Remove the cardboard box and the Styrofoam packaging.
2. Lift the washer and remove the packaging from the base.
3. Make sure to remove the small triangular foam (A) together with the bottom
packaging. Otherwise, place the unit on a side surface and remove it manually.
4. Remove the tape securing the power cord and drain hose.
5. Remove the inlet hose from the drum.
Service & Disposal
•
Any electrical work required to service the appliance must be carried out by a qualified electrician or
competent person.
•
This product must be serviced by an authorised Service Centre, and only original spare parts must
be used.
This symbol on the product or on its packaging indicates that this product must not
be treated as household waste. Instead, it must be taken to the appropriate collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential nega-
tive consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local authorities, your
household waste disposal service or the shop where you purchased the product.
Packing materials
Materials with the symbol
for recycling.
Disposal of the device
1.
Disconnect the plug from the socket.
2. Cut the power cord and discard it.
are recyclable. Dispose of the packaging in a suitable collection container
32
English
A
infiniton.es