Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning & Maintenance
Error code list
The following list will show you a number of error codes that may appear on the display of your washing
machine.
DESCRIPTION
E02
E03
U4
H
EXX
(*) See the chapter on maintenance and cleaning of the machine.
POSSIBLE CAUSE
No water ingress
Abnormal drainage.
Door lock malfunction.
Temperature in the drum is too high.
Other type of error
Check if the tap is turned on, if the
water supply is interrupted, if the
water inlet hose and the water inlet
valve filter are blocked, if the water
inlet hose of the washing machine is
frozen, and if the water inlet hose of
the washing machine is frozen. In this
case, contact the service centre for
repair.
Clean the pump filter.
Check if the drain hose is bent, kinked
or blocked. If the fault persists, con-
tact the service centre for repair. .
Close the door again and then press
the START/PAUSE button to restart the
programme. If the fault persists, con-
tact the service centre for repair.
Press the START/PAUSE button to sus-
pend the operation of the machine
and wait for a few minutes. When the
temperature in the drum drops to a
safe range and the fault code on the
display is cleared, press the START/
PAUSE button to continue with the rest
of the programme.
Turn the wash cycle selector knob to
the "OFF" position to turn off the power
supply, unplug the power cord and
contact the service centre for repair
as soon as possible.
47
English
SOLUTION
infiniton.es
Publicidad
