SAFETY INSTRUCTIONS
Caution! Closely follow the instructions set
out in this manual. All responsibility, for any
eventual inconveniences, damages or fires
caused by not complying with the instructions
in this manual, is declined. The extractor
hood has been designed exclusively for
domestic use.
Caution! Do not connect the appliance to the
mains until the installation is fully complete.
Before any cleaning or maintenance
operation, disconnect hood from the mains
by removing the plug or disconnecting the
mains electrical supply.
Always wear work gloves for all installation
and maintenance operations. The appliance
is not intended for use by children or
persons with impaired physical, sensorial or
mental faculties, or if lacking in experience
or knowledge, unless they are under
supervision or have been trained in the use
of the appliance by a person responsible for
their safety. This appliance is designed to
be operated by adults, children should be
monitored to ensure that they do not play with
the appliance. This appliance is designed
to be operated by adults. Children should
not be allowed to tamper with the controls or
play with the appliance. Never use the hood
without effectively mounted grating! The hood
must NEVER be used as a support surface
unless specifically indicated. The premises
where the appliance is nstalled must be
sufficiently ventilated, when the kitchen hood
is used together with other gas combustion
devices or other fuels. The ducting system
for this appliance must not be connected
to any existing ventilation system which is
being used for any other purpose such as
discharging exhaust fumes from appliances
burning gas or other fuels. The flaming of
foods beneath the hood itself is severely
prohibited. The use of exposed flames is
detrimental to the filters and may cause a
fire risk, and must therefore be avoided in all
circumstances. Any frying must be done with
care in order to make sure that the oil does
not overheat and ignite.
Caution! Accessible parts of the hood
may became hot when used with cooking
appliance.
With regards to the technical and safety
measures to be adopted for fume discharging
it is important to closely follow the regulations
provided by the local authorities. The hood
must be regularly cleaned on both the inside
and outside (AT LEAST ONCE A MONTH).
This must be completed in accordance with
the maintenance instructions provided in this
manual). Failure to follow the instructions
provided in this user guide regarding the
cleaning of the hood and filters will lead to
the risk of fires. Do not use or leave the hood
without the lamp correctly mounted due to
the possible risk of electric shocks. We will
not accept any responsibility for any faults,
damage or fires caused to the appliance
as a result of the non-observance of the
instructions included in this manual.
Warning! Failure to install the screws or
fixing device in accordance with these
instructions may result in electrical hazards.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable containers
to recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
household waste. Return the product to your
local recycling facility or contact your municipal
office department for household waste or the
shop where you purchased this product.
USE
The hood is designed to be used either for
exhausting
or filter version
INSTALLATION
The mains power supply must correspond to the
rating indicated on the plate situated inside the
hood. If provided with a plug connect the hood to
a socket in compliance with current regulations
and positioned in an accessible area, after
installation. If it not fitted with a plug (direct mains
connection) or if the plug is not located in an
accessible area, after installation, apply a double
pole switch in accordance with standards which
assures the complete disconnection of the mains
under conditions relating to over-current category
III in accordance with installation instructions.
Warning! Before re-connecting the hood
circuit to the mains supply and checking
the efficient function, always check that the
mains cable is correctly assembled.
with the
.
13