clage DSX Touch Instrucciones De Uso página 33

2. How to use
Main control
The display shows the main control by default. The current settings are shown and by
tapping the touch display you can access various submenus and functions.
Status display, top
User selection
Flow display
Applications
Temperature display
The coloured scale ring fills up as the temperature setting increases and shows a colour
gradient from blue at low temperatures to red at high temperatures. In addition, the
set temperature in °C is shown as a number in the centre of the display.
Temperature setting
The desired temperature can be selected by tapping on
ting or by dragging along the coloured scale ring for a quick selection within a range
of 20 °C to 60 °C. Tapping
comfort range between 35 and 43 °C by 0.5 °C. If the temperature is set below 20 °C,
the symbol appears in the temperature display and the appliance switches off the
heating function.
Temperature quick selection
A short tap on the temperature value opens the selection window for stored tempera-
tures. A total of six temperatures are preset and can be assigned their own values.
By briefly tapping on the respective temperature field, the temperature is set as the
setpoint. To save your own temperature, change the setpoint in the main control to the
desired value using
and then long tap on the memory location to be changed. The memory field flashes
green briefly to confirm.
Flow display
The maximum hot water flow can be defined by the user. Briefly tapping on the flow
rate display opens the selection menu. Select the desired flow rate and confirm with .
MAX No flow control (motor valve deactivated)
Auto Automatic control, i.e. flow limited so that the set desired temperature is
reached
z.B. 8,0 Flow limitation to a freely selectable value between 4.5 and 25 l/min
User menu
Up to eight user profiles can be created. Every user has the option to save his desired
temperatures for the different uses in a profile. The user profiles can be selected by tap-
ping on the profile image and the temperatures saved in the profile are set. By tapping
on , a new profile can be created and then configured. By long tapping on a profile, it
can be edited or deleted.
33
Temperature display
Status display, bottom
or once changes the temperature by 1 °C, in the
and , briefly tap on the setpoint to open the quick selection
CLAGE
Main menu
Temperature setting
and for the fine set-
EN