clage DSX Touch Instrucciones De Uso página 34

DSX Touch
2. How to use
EN
Applications
Preset applications can be selected here. Simply tap on the desired symbol.
The temperatures set at the factory (
bath = 40 °C, hot water = 48 °C) can be changed for each application via the
temperature setting. If you touch the temperature value in the temperature display or
the application symbol for 3 seconds, the temperature is saved for the selected applica-
tion. The temperature display flashes once for confirmation. Application temperatures
saved in the user profile can be called up at any time by tapping on the corresponding
symbol.
Status display, top
Operation lock (for further information see page 38)
The inlet temperature exceeds the target value (appliance does not heat up)
Bluetooth is activated
Wi-fi is activated
The appliance is connected to the CLAGE Cloud
Status display, bottom
Display area for functions which require confirmation from the user or which are of
great significance.
Eco active: The outlet temperature for all applications and the water flow are
limited to an energy-efficient value. If the temperature is set higher via the
temperature setting, the symbol start to flash.
Maintenance: Tap the symbol to open a status message with additional informa-
tion.
Maximum temperature reached: The temperature cannot be increased any fur-
ther since the set temperature limit has been reached. The temperature limit
can be changed in the main menu under "Settings".
Heating activated: As soon as the appliance heats water, this symbol appears.
Power limit: The full output of the instantaneous water heater does not suffice
to heat the tapped quantity of water to desired temperature. Reduce the flow
via the flow display.
Operating mode
When heated water is drawn off at a fitting, the main control changes to the operating
display and changes the background colour from blue at low temperatures to red at
high temperatures, depending on the set outlet temperature.
After each withdrawal, the amount of water, the electricity required and the costs
incurred are displayed.
Main menu
All function menus and saved values of the appliance can be selected from here. Tap
on the symbol to go back to the main control.
34
handwash = 35 °C, shower = 38 °C,