Publicidad
Idiomas disponibles
Idiomas disponibles
6
PROPOSITION 65
WARNING
This product contains a chemical known to the
state of California to cause cancer, birth defects
or other reproductive harm. Some dust created by
power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated
lumber.
Your risk of exposure to these chemicals varies
depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a
well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
Save these instructions.
7
INSTALLATION
7.1
UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1.
Open the package.
2.
Read the documentation provided in the box.
3.
Remove all the unassembled parts from the box.
4.
Remove the machine from the box.
5.
Discard the box and packing material in
compliance with local regulations.
WARNING
For your personal safety, do not insert battery before
the tool is assembled completely.
English (Original Instructions)
7
7.2
INSTALL THE BELT CLIP
The belt clip may be installed on either side of the
housing.
1.
Align the belt clip with the hole on the machine.
2.
Insert and tighten the screw to secure the belt
clip.
7.3
ATTACH THE AUXILIARY HANDLE
The auxiliary handle may be installed on either side of
the machine.
1.
Turn the handle grip counter-clockwise to loosen
it.
2.
Open the hooks wide enough to fit over the
mounting ribs, behind the torque adjustment ring.
NOTE
EN
Publicidad
