Descargar Imprimir esta página

Qilive Q.6505 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
4.3 Level feet
If the refrigerator tilts in some way, adjust the height of the left/right foot (3) of the
refrigerator to be in a horizontal level (
Turn the foot (3) clockwise or counter clockwise to adjust the height.
Note: If the appliance is not level, the door and the door seal will not be closed properly.
4.4 Reverse door
Ensure the appliance is unplugged and empty. To take the door off, it is necessary to tilt
the appliance backwards. You should rest the appliance on something solid so that it will
not slip during the door reversing process. All parts removed must be saved to do the
reinstallation of the door. Do not lay the appliance flat as this may damage the coolant
system. It is better that 2 people handle the appliance during assembly.
1. Remove the top cover plate (
2. Remove the top hinge (
3. Remove the upper door and place it on a soft pad to avoid scratches (
4. Remove the middle hinge (
5. Lift the lower door to remove it and place it on a soft pad to avoid scratches
(
Fig. 5).
6. Unscrew and remove the bottom hinge and replace it on the left side (
7. Replace the freezer door (
8. Replace the fridge door (
9. Replace the top hinge on the left side (
10. Replace the top cover plate (
4.5 Positioning
Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance. This ensures the correct
operation of the appliance.
Climate class
Extended temperate
Temperate
Subtropical
Tropical
4.6 Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance to a separate earth in compliance
with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not
observed.
Fig. 12).
Fig. 1).
Fig. 2).
Fig. 4).
Fig. 7).
Fig. 8).
Fig. 9).
Fig. 10).
Symbol
SN
N
ST
T
11 11
Fig. 3).
Fig. 6).
Ambient temperature
range (⁰C)
From 10 to 32 ⁰C
From 16 to 32 ⁰C
From 16 to 38 ⁰C
From 16 to 43 ⁰C
EN

Publicidad

loading