Adjusting The Steering Angle; Basic Setting Of The Chassis According To The Rider Weight - DEFYGRAVITY SHERCO 250 SE/R 2019 Manual De Propietario

ADJUSTING THE STEERING ANGLE

BASIC SETTING OF THE CHASSIS ACCORDING TO THE RIDER
WEIGHT
Standard weight of the-
rider (with equipment)
The steering angle can be changed using the set
screws located on the bottom of the steering
column.
Loosen the nut
until you have the steering angle desired.
1
Tighten the nut and do the same operation
on the other side.
2
Steering angle
lock nut
If the weight of the rider is above or below
75 à 85kg
the standard, compensate by changing
the stiffness of the springs (forks and shock).
and tighten the screw
1
M8
2
20Nm
101