Checking The Clutch Fluid Level; Removing The Engine Protector - DEFYGRAVITY SHERCO 250 SE/R 2019 Manual De Propietario

CHECKING THE CLUTCH FLUID LEVEL

REMOVING THE ENGINE PROTECTOR

- Turn the knob
to move the lever away from the handlebar.
B
Clutch lever free play A
h
1
- The hydraulic fluid is highly corrosive it can be
2
dangerous to the skin.
3
- Read the recommendations on the container.
Position the master cylinder horizontally.
- Remove the two screws
and the membrane
- Check the fluid level and fill if necessary.
Level of brake fluid below
the top of the reservoir.
Minerva brake fluid DOT 4
- Reinstall the lid with the membrane
and the screws.
Remove the screws
protector.
1
in the opposite direction
B
≥3mm
ATTENTION
1
3
and remove the engine
1
, the cover
2
4mm
115