Attach The Auxiliary Handle; Install The Battery Pack; Remove The Battery Pack; Operation - GreenWorks 82E8 Manual Del Operador

WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
8.2

ATTACH THE AUXILIARY HANDLE

1. Remove the knob (1) from the handle.
2. Attach the auxiliary handle and lower clamp (2) on
the shaft.
3. Set the auxiliary handle in the most comfortable in
use position.
4. Put the bolt (3) through the holes.
5. Tighten the auxiliary handle with the knob.
2
1
8.3

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read and understand the instructions in the
battery and charger manual.
English
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4
1. Push and hold the battery release button (1).
2. Remove the battery pack from the machine.
9
3
Before you operate the machine, read and understand
the safety regulations and the operation instructions.
Be careful when you operate the machine.
9.1
9.2
1. Push the on/off button (1).
2. Push the lock-out button and pull the trigger. Once
the machine is running you can release the lock-out
button.
2
7

REMOVE THE BATTERY PACK

OPERATION

IMPORTANT

WARNING

CONTROLS

START THE MACHINE

1
EN
1
3