Publicidad
Idiomas disponibles
Idiomas disponibles
Bowl Replacement
Follow the steps below to replace the bowl in an existing installation.
1.
Turn off water flow to the Water Bowl system and completely drain any water from the bowl.
2.
Unscrew the water spout assembly from the center of the bowl, revealing the retaining nut on
the bulkhead assembly.
3.
Unscrew and remove the retaining nut and gasket from the center of the bowl to release the
bowl.
4.
With two people, remove the old bowl by lifting it straight up and set it aside.
5.
Install the new bowl with the foam gasket onto the niche pipe.
6.
Re-install the gasket, retaining nut, and water spout assembly in the center of the new bowl.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Replacement Parts
Part No.
GLXWBNICHE
Bowl Niche Replacement Kit
GLXWBGSK
Bowl Gasket Replacement Kit
GLXWBBKHD
Bowl Bulkhead and Nut
Description
14
Publicidad
