Start/Pause Button; Power Button - Haier HLP24E Manual Del Usuario

DELaY sTaRT bUTTon
•
Press this button to delay the start of your wash cycle between 1 - 24 hours
in one hour increments.
•
Use this button to select a delayed start of the washer. The number of hours
will be shown in the Estimated Time Remaining Display. Each press of the
Delay Start Button will increase the time by 1 hour.
•
One button press after 24 will cancel the Delay Start feature. You can also
cancel the Delay Start feature by turning off power to the washer with the

POWER Button.

•
The START/PAUSE Button must be selected to begin the countdown.
EsTIMaTED TIME REMaInInG DIsPLaY
•
The Estimated Time Remaining Display shows the estimated cycle time in
minutes.
•
When the Delay Start option is being used, the Estimated Time Remaining
Display will show the delay time in hours.

sTaRT/PaUsE bUTTon

•
Press this button to start a selected cycle or to pause an operating cycle.
noTE: After starting the wash cycle, you must pause the operating cycle to
change the Water Level setting.
PoWER bUTTon
•
Press the POWER button to turn on the washer.
noTE: If the washer is turned on, but START/PAUSE is not pressed, the power
will automatically turn off after 5 minutes.
13