Publicidad
Idiomas disponibles
Idiomas disponibles
Auto Operation
<For Cooling Model>
The temperature and fan speed are automatically set by the electronic controls based on
the actual room temperature.
If you feel hot or cold, press TEMPERATURE SETTING buttons for more cooling or
heating effect.
You cannot switch the indoor fan speed. It has already been set by the Auto Operation
Mode rule.
<For Heating Model>
Healthy Dehumidification Operation
You can set desired temperature and indoor fan speed.
Setting Temp. Range : 18~30°C.
NOTE
: You can not set the actual setting temperature and the fan
speed in this operation mode. But you can use the Auto swing
in this operation. If the system is not operating as desired,
switch manually to another mode
During Healthy Dehumidification Operation
If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification
function.
It automatically sets the room temperature and airflow volume to the best
condition for dehumidification, based on the sensed current room temperature.
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
During the healthy dehumidification function, the fan speed is automatically set
according to the optimization algorithm responding to the current room
temperature status, so that the room condition is kept healthy and comfortable
even in the very humid season.
Please select the code
as per your requirement.
Code
Feel
Cold
Slightly cool
Neutral
Slightly warm
Warm
Operating Instructions
Owner's Manual 11
Publicidad
