Bimar MP52 Manual De Instrucciones página 46

on the charger is on. When the light on the battery charger turns to green (a charge
usually takes about 3.5h), this indicates that the battery is fully charged. You may now
stop charging and remove the plug from the power socket. Do not leave the scooter
charging for longer than it takes to fully charge.
Description
Assembly
The appliance can only be used if it is completely and correctly assembled in all its parts,
complete with handles, bar in a vertical position and locked.
Proceed as described and use the illustrations for reference.
To position the bar correctly, press the rear wheel mudguard down while lifting the bar
upwards into a vertical position. Lock securely, using the release/lock lever, and ensure that
the locking screw is at the bottom.
When finished, check that the bar is firmly fixed to the body of the scooter.
Screw the left handle onto the left side of the handlebar marked in a counterclockwise
direction.
Screw the right handle on the right side of the handlebar marked, in a counterclockwise
direction, right to the end.