Vorwerk kobold SPB100 Manual De Instrucciones página 64

Fault
The DuoClean cleans edges
insufficiently.
There is still a thin layer of
dirt on the floor.
Stain removal is
insufficient.
After cleaning, the floor looks
tarnished.
64
Possible cause and solutions
– Change the cleaning cloth , see
[} 58].
– The film of moisture does not dry evenly.
– Go over the floor again using the DuoClean in dry mode with a
dry cleaning cloth to remove residual liquid.
It is possible that the cleaning cloth has not been fixed properly.
– Check whether the cleaning cloth is straight and firmly fixed on
the cloth holder frame.
It is possible that the cleaning cloth was not washed prior to first
use.
– Wash the cleaning cloth prior to first use, see
It is possible that the cleaning cloth is too dry.
– Check the LED wave symbol on the DuoClean. If it is lit up
yellow, you need to fill the tank, see
inserting the tank
– Moisten the cleaning cloth by pressing the function key, see
Single application of moisture to a dry cloth
– Also increase the moisture setting if necessary using the
function key, see
It is possible that the cleaning cloth is soiled excessively.
– Change the cleaning cloth, see
[} 58].
It is possible that the cleaning cloth is soiled excessively.
– Change the cleaning cloth, see
[} 58].
It is possible that the cleaning cloth is too dry.
– Check the LED wave symbol on the DuoClean. If it is lit up
yellow, you need to fill the tank, see
inserting the tank
– Moisten the cleaning cloth by pressing the function key, see
Single application of moisture to a dry cloth
– Also increase the moisture setting if necessary using the
function key, see
mode [} 53].
There may be residual quantities of old care products and cleaning
agents on the floor.
– First let the floor dry completely and, if there is still no change,
use a dry cloth to remove the residue.
Replacing the cleaning cloth
Removing, filling and
[} 52].
Removing, filling and inserting the tank
Replacing the cleaning cloth
Replacing the cleaning cloth
Removing, filling and
[} 52].
Automatic application of moisture and dry
After use [} 59].
[} 54].
[} 52].
[} 54].