Publicidad
Idiomas disponibles
Idiomas disponibles
lnstruction
18
PRESET key
Short press --- enter the interface of calling out radio stations, long press --- enter the interface of pre-stored
radio stations
SKIP+ key
19
DAB mode: short press --- move the station backward
Long press --- move the station backward quickly
FM mode: Short press --- Backward fine-tuning-
Long press --- Search backwards semi-automatically
Menu mode: short press --- move forward
Battery loading:
Please refer to the illustration to open the byttery compartment,
insert the CR 2025 battery and close the compartment.
Note:
1.Do not place the remote control in places that are hot and humid.
2.Do not charge the battery.
3.Remove the battery when unused for long period of time.
4.The battery should not be exposed to excessive heat such as direct
sun, fire or similar.
Switch machine
① Turn the power switch on the back of the machine to ON to turn on, and turn to OFF to turn off.
② When the power is ON, it would directly go into the DAB mode.
DAB/FM/BT/USB/TF mode switch
① Enter DAB mode when power on, and automatically search for DAB stations (you can also long press the ENTER key
to re-search stations automatically), the machine will automatically synchronize DAB time after searching, after
searching for DAB stations, press the up and down keys to select the station and press ENTER Key to play the station.
② In DAB mode, press the MODE key to switch to FM mode, long press the ENTER key to automatically search and
save the station. When listening to a radio station, press the up and down keys to manually fine-tune the frequency of
the radio station. Long press the PRESET key to store your favorite Radio; short press the PRESET key to call out the
stored radio station, press the up and down keys to select the radio station, press the ENTER key to confirm, the
machine will play the radio station;
③ In FM mode, press the MODE button to enter BT mode, the device name of this machine is "DAB P200", you can
use it according to the Bluetooth mode operation instructions in this manual;
④ In BT mode, press the MODE button to enter the TF card mode, insert the TF card with MP3 songs to play the music
in the card, press the up and down keys to select the song, press the ENTER key to play/pause, short press the
INFO/MENU key to view Song information, long press the INFO/MENU button to enter the menu settings.
⑤ In TF card mode, press the MODE button to enter the USB mode, insert the USB disk with MP3 songs to play the
music in the disk, press the up and down keys to select the song, press the ENTER key to play/pause, short press the
INFO/MENU key to view Song information, long press the INFO/MENU button to enter the menu settings.
How to enter Standby state
① In any playback mode, press the Standby button to enter the standby time mode. At this time, only the time, date
and alarm status are displayed.
② In Standby mode, you can press the Info/Menu button to set the time, date, alarm clock, etc., and press the Alarm
button to directly enter the alarm clock setting.
③ Press Standby again in the standby mode to exit the standby mode and return to the current playback mode.
05
English
Recharge
① This machine can charge the machine when it is switched on and off, please use the supplied charger (DC9V, 700mA
output) for charging.
②Red light is on when charging, green light is on when fully charged.
③ This machine supports charging and playing function.
Use headphones
① Please use earphones with 3.5mm diameter standard three-terminal or four-terminal plug.
② When the earphone is inserted, the earphone symbol is displayed on the screen, and there is no sound from the
speaker in earphone mode.
③ In order to avoid discomfort to the ears due to high volume, it is recommended to turn down the volume before
inserting the earphones, and then adjust to the appropriate volume.
Menu Settings
① For the menu item setting in each mode, please refer to the figure below "MENU TREE".
② In each mode, long press the INFO/MENU key to enter the menu settings in this mode, press the up and down keys
to select the sub-menu items, press the ENTER key to confirm and enter, if there is only one sub-menu in the
sub-menu, press ENTER directly Key to confirm and enter. During operation, short press or long press INFO/MENU key
to return.
Time/calendar settings
① After the machine is turned on, it is in DAB mode and automatically searches for DAB radio stations. If a radio station
is found, the machine will automatically synchronize the local DAB time.
② If the local DAB radio station is not searched, the machine can also set the time manually. The setting process is as
follows, long press the Info/Menu key to enter the menu selection, press the up and down keys or the volume knob to
select "Time/Date", press the "ENTER" key to enter, turn the "volume knob" or the up and down keys to select "Set
Time/Date" And press the "ENTER" key to enter the "day" adjustment, press the volume knob or the up and down keys
to select, press the ENTER key to confirm and enter the "month" adjustment, also press the up and down keys or rotate
the volume knob to select, and then press the ENTER key to confirm and enter " Year" adjustment, press the up and
down keys or rotate the volume knob to select, press the ENTER key to confirm and enter the "hour" adjustment, press
the up and down keys or turn the volume knob to select, and then press the ENTER key to confirm and enter the
"minute" adjustment, then press the up and down keys Or turn the volume knob to select, press the ENTER key to
confirm, and it will automatically exit to the previous setting interface after completing the time and date setting. Press
INFO/MENU to return step by step, or long press Info/Menu to exit the menu directly to the main mode.
Auto Update/Set 12/24 Hour/Set Date Format/Clock Style item setting
Combining the up and down keys or turning the volume knob, the Enter key can complete the Auto Update/Set 12/24
Hour/Set Date Format/Clock Style item setting:
Auto Updatea item: select Update From Radio/No Update
Set 12/24 Hour item: select 12Hour/24Hour
Set Date Format item: select DD-MM-YYYY/ MM-DD-YYYY
Clock Style item: select Digital/ Anglog
Alarm setting
This machine can set 2 groups of alarms, which can be set according to the following steps.
① To set the alarm clock, short press the ALARM key to enter the ALARM setting interface;
② Press the up and down keys or turn the volume knob to select alarm 1 or alarm 2 settings;
③ After making the selection, short press the "ENTER" key, press the up and down keys or turn
the volume knob to select the OnOff/Time/Source/Repeat/olume setting item;
Alarm item: On/Off selection;
Time item: select the time by up and down keys or turn the volume knob, and then press ENTER to confirm.
lnstruction
06
English
Publicidad
