iRobot Roomba RVD-Y1 Manual De Instrucciones página 10

Cleaning the Full Bin Sensors
1
Remove and empty the bin.
EN
2
Wipe the inner sensors with a
clean, dry cloth
3
Wipe the bin door with a clean,
dry cloth.
7 For more information, visit global.irobot.com
Washing the Bin
Important: Do not wash the filter. Remove the
filter before washing the bin.
1
Release the bin, remove the filter, and
open the bin door.
2
Rinse the bin using warm water.
Note:
3
Make sure the bin is completely dry.
Closed Door
Reinsert filter and place bin back in
the robot.
Opened Door
Bin is not dishwasher safe.
Cleaning the Edge-Sweeping Brush
1
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping Brush
in place.
2
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris, then
reinstall the brush.