Descargar Imprimir esta página

iRobot Roomba RVD-Y1 Manual De Instrucciones página 7

Ocultar thumbs Ver también para Roomba RVD-Y1:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Using your Roomba® Robot Vacuum
Positioning the CleanBase Automatic Dirt Disposal
Good Wi-Fi
Coverage
®
0.3 m (1 ft)
above
0.5 m (1.5 ft)
both sides
1.2 m (4 ft)
in front
Download the iRobot Home App and connect to Wi-Fi
• Follow the step-by-step instructions to set up your Roomba® Robot Vacuum.
• Set an automatic cleaning schedule and customise cleaning preferences.
• Create smart maps to tell your robot where, when and how to clean.
Note:
Do not place your
CleanBase in direct sunlight.
Ensure that the area
around the dock is free of
1.2 m (4 ft)
clutter to improve docking
from stairs
performance.
WARNING: To prevent the
risk of your robot falling
downstairs, ensure that the
Charging Station is placed
at least 1.2 metres (4 feet)
*Objects are not to scale.
away from stairs.
Charging
• Place the robot on the CleanBase to activate the
battery.
Note:
we recommend that you charge the robot for 3
hours prior to starting the first cleaning job.
• If your robot needs to recharge mid-clean, it will
return to its CleanBase. Once it is sufficiently charged,
it will then resume the cleaning job where it left off.
• The robot uses a small amount of power whenever it is
on the CleanBase. You can put the robot in a further-
reduced power state when not in use. For instructions
®
and more details on this Reduced Power Standby
Mode, refer to the iRobot HOME App.
• For long-term storage, turn off the robot by removing
it from the CleanBase and holding down
seconds. Store the robot in a cool, dry place.
White Light Ring While Charging
Solid White: fully charged
Pulsing White: charging
Pulsing Red: charging/low
Your robot comes with a partial charge, but
Roomba
i5+ Owner's Guide
®
EN
for 10
4

Publicidad

loading

Este manual también es adecuado para:

Roomba adj-n1