Publicidad
Idiomas disponibles
Idiomas disponibles
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
POWER
Press the button
to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
MODE (COOL / IONIZER*^)
You must add water before operating the unit. Press the MODE button to select COOL and IONIZER
modes.
Pressing the MODE button until COOL
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling
Media is completely wet.
Pressing the MODE button until IONIZER
reduce particles in the air, thus promoting cleaner air quality.
Pressing the MODE button until both COOL
evaporative cooling and Ionizer together.
Pressing the MODE button again will deactivate both COOL
panel, switching off both evaporative cooling and Ionizer function altogether.
SPEED
button repeatedly to change the speed between | - || - |||.
Press the SPEED
SWING
Press the SWING button until
begin to move left to right automatically. You can manually adjust the louvers
to change vertical air flow.
is illuminated on the control panel activates evaporative
is illuminated activates Ionizer. An Ionizer helps to
and IONIZER
^ Ionizer reduces particles in the air. This is not an air purifier.
is illuminated on the display. The louvers will
EN
3
are illuminated activates both
and IONIZER
lights on the control
* Applicable for models with Ionizer feature only.
Louver
Movement
Publicidad
