Sauder OFFICE WORKS AFFIRM Serie Instrucciones De Montaje página 5

Hardware Usage Guide
HOW TO USE A TWIST-LOCK
1.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
Step 1
å
You have the option to use the Reception Hutch
as a Straight or a Corner.
å
If you want the Reception Hutch to be used as a
Straight, go to the next step.
å
If you want the Reception Hutch to be used as a
Corner, go to Step 8
Straight (Left or Right)
Steps 2 - 7
www.sauder.com/commercial-office/service
FASTENER
®
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
2.
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Corner
Steps 8 - 18
426466
Dowel end
0
Page 5