Sauder OFFICE WORKS AFFIRM Serie Instrucciones De Montaje página 22

Step 17
å
Carefully stand your unit upright.
å
Pull the lower wing of the INTERLOCK MECHANISM (34G) forward until it clicks into place as shown in Diagram 1.
å
To insert the LOCKING DRAWER (H) into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION
RAILS on the unit and push the drawer into the unit until it is fully inserted.
å
NOTE: The lower DRAWER ACTUATOR will be near the top of the RIGHT DRAWER SIDE as shown in Diagram 2.
å
Pull the upper wing of the INTERLOCK MECHANISM (34G) forward until it clicks into place as shown in Diagram 3.
å
Insert the DRAWER (G) by lining up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the unit as
shown in Diagram 4. Push the drawer in until it is fully inserted.
1
3
Page 22
Pull the lower
wing forward until
it clicks into place.
34G
Pull the upper
wing forward until
34G
it clicks into place.
H
G
427875
2
The lower drawer
ACTUATOR must
be here.
4
The upper drawer
ACTUATOR must
be here.
www.sauder.com/commercial-office/service