Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRIC PRUNING SHEAR
•
Make sure the battery is fully charged before first time using.
•
The battery is not fully charged when you buy, you must charge 2.5 hours
before using first time.
•
Re-charging battery when indicator shows a blinking light.
•
Do not charge batteries over 5 hours, don't use up completely otherwise
battery life will be reduced.
•
Need to replace battery if battery running time is not enough. Users can
only use the original equipment manufactured by the customer center
(OEM) battery pack.
•
Keep safety rules and environment protection information in mind all the time.
10.1 BATTERY CHARGING PROCEDURE
•
Charge at temperature of + 10°C ~ + 22°C indoor.
•
Make sure the switch at "OFF" position before charging.
•
Connect adaptor of charger with battery correctly.
•
Make sure specifications on battery and adapter matched before charging.
•
Red LED light on the charger indicates the battery is charging, green LED
light indicates fully charged, average charging time is about 2.5 hours.
•
Pull out connector from power and battery after fully charged.
•
Please make sure the battery charged at least once every three months
when the battery is not using.
11. WORKING ENVIRONMENT
•
Keep temperature of environment at 0°C ~ 45°C when charging battery,
-10°C ~ +60°C when battery is working.
•
Keep tool at temperature of -5°C ~ 30°C when working
•
Do not use in explosive atmosphere or near flammable substances or gases.
•
Do not use in case of rain or on wet branches
68
www.gruposanz.es
Publicidad
