Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRIC PRUNING SHEAR
21. TROUBLE SHOOTING AND REPAIR
Have your power tool serviced by a qualified repair person using only identical
parts for replacement. This will ensure the safety of the power tool.
Issue
Battery out of charge.
Battery not connected.
Pruner
doesn't start.
Safety switch cannot be initiated.
On / off switch failure.
Loose internal connections.
Intermittent
operation.
On / Off switch failure.
Blade dull.
Blade gap.
Hot blades.
Poor lubrication, resulting in
excessive friction.
Lubrication is not in place, resulting
in excessive friction.
Dirty blade.
Poor trimming
Blade dull.
performance.
Trimming quality is poor.
The battery is not fully charged.
The battery is not properly placed in
the charger
The battery charger is not connected
Will not
properly to the power supply.
charge.
Charger red
Battery contact point is dirty.
light flashes.
Invalid battery.
Battery charger is invalid.
Possible cause
www.gruposanz.es
Solution
Charge Battery.
Connect battery.
Open by initiating safety on
switch.
Send to repair service center.
Send to repair service center.
Sharpen or replace the blade.
Sharpen or replace the blade.
Lubricate blade.
Lubricate blade.
Clean blade.
Sharpen or replace the blade.
Read the instructions
carefully.
Charge the battery.
Insert the battery correctly.
Connect properly.
Clean the battery contacts.
Replace battery.
Replace Battery Charger.
79
Publicidad
