GreenWorks BAF721 Manual Del Propietário página 8

OPERATION
CHECKING BATTERY CAPACITY
Note: The battery is not shipped fully charged. It is recommended to fully charge before the first
use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a
memory and can be charged at any time.
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the battey
capacity level. See chart below:
BATTERY CAPACITY
INDICATOR (BCI)
BUTTON
Lights
4 Green Lights
3 Green Lights
2 Green Lights
1 Solid Green Light
1 Blinking Green Light The battery is between 10% and 15% capacity
No Green Lights
BATTERY PROTECTION FEATURES
GW 40V lithium-ion battery packs are designed with features that protect the lithium-ion cells and
maximize battery life.
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does
not work, the battery needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures down to -14°C (6.8°F). Put the battery
pack on a tool and use the tool in a light duty application. After about a minute, the pack will warm
up and begin operating normally.
Capacity
The battery is more than 78% capacity
The battery is between 50% and 78% capacity
The battery is between 35% and 50% capacity
The battery is between 15% and 35% capacity
The battery is under 10% capacity and requires
charging immediately
8
LIGHT LED METER