Publicidad
Idiomas disponibles
Idiomas disponibles
at the top side, more than 100mm on both sides, and above 50mm at the
Dimensions in mm:
W
D
595
635
Note：Figure 1, Figure 2 only illustrate the space demand of the product.
4.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates
should be applied underneath the refrigerator, so as to prevent color change due to heat dissipation.
Unobstructed ventilation shall be maintained around the appliance or in an embedded structure.
Preparations for use
2.
Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour's standing, so as to ensure its normal operation.
3.
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
4.
Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the refrigerator door, if the temperature
inside the refrigerator compartment drops obviously, it indicates the refrigeration system is working normally.
5.
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user's temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit
breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened
by air convection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television surrounding it, so try to
keep the refrigerator as far away as possible in such case.
Functions
1. Functions
1.1 Temperature setting
COLDEST
5
4
3
2
COLD
1
Temperature can be adjusted by pressing the 'SET' key. Every time when the "SET" key is pressed, the current mode
indicator lights off while the next mode indicator lights up, with the said mode setting validated if no key operation within 5s
(or else, the mode setting will be invalid). After the setting takes effect, temperature will be immediately controlled as per
the mode setting.
The temperature modes cycle as following: "5→4→3→2→1→FAST COOL→5"
H
A
B
1855
966
1176
When the user needs a colder temperature.
When in normal use.
When the user does not need a colder temperature.
back
side of the refrigerator.
E
F
C(°)
130
50
100
MODEL
Publicidad
