Pfannenberg PTF Serie Instrucciones De Servicio página 77

ENG
8.2 Dismantling
Prerequisites
DANGER – Danger to life due to electric shock. Make sure that the unit is voltage-free.
Procedure
1. Switch off the unit, secure against switching back on and wait until all parts have a temperature below 40 °C.
2. Physically disconnect the energy supply from the unit and discharge stored residual energies.
3. Clean dirt and contamination from the unit.
4. Remove operating and auxiliary materials and dispose of them in an environmentally friendly way.
5. Dismantle the unit into the different separable materials.
• Observe the valid work safety and environmental protection regulations.
8.3 Disposal
NOTE
Old units are also professionally disposed of by Pfannenberg. Delivery to one of our manufacturing facilities shall be free of
charge.
Dismantled components should be recycled unless return or disposal agreements have been made:
• Scrap metals
• Hand over plastic elements for recycling
• Dispose of other parts sorted according to their material properties
The parts of the unit consist basically of the following materials:
• plastic
• non-ferrous metals
• stainless steel
• steel and aluminum parts
• electronic sub-assemblies
Operating Manual | Top Filterfans / Top Exhaust Filter | – 230 / 115 V | 086150000 37/40