Publicidad
Idiomas disponibles
Idiomas disponibles
Depth
Control Rod
Chuck
Auxiliary
Handle
1. Turn the auxiliary handle
clockwise to release it. The
opening of the mount will passes
freely over the chuck.
2. Insert the hammer drill head
through the auxiliary handle
mount.
3. Insert the depth control rod
into the mount small orifice.
4. Rotate the auxiliary handle
together with its mount until is set
in the right position to operate the
tool. The auxiliary handle is
secured when the handle notches
are attached to the edge of the
gearbox.
5. Turn the auxiliary handle
to firmly set the mount
onto the hammer
drill head.
6
ENGLISH
Impact-Rotation
Selector
Speed
Rotation
Control
Selector
Lever
Chuck
Key
Assembly
Depth
Control Rod
3
Steps
1 & 2
Frame
Auxiliary
Handle
Parts
Handle
Continuous
Use Button
Switch
Power cord
protector
Chuck
Key Holder
4
5
Power Supply
Cord
Publicidad
