Manuales relacionados para Truper ROEL-60N-2
Resumen de contenidos para Truper ROEL-60N-2
- Página 1 Manual SDS Plus 7.2 A Joules Rotary Hammer Impact Energy Motor ROEL-60N-2 Applies for: Code Model 100372 ROEL-60N-2 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tools Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety warnings for Drills of fatal injuries please read and and Hammer Drills understand this Manual before using the tool.
- Página 3 Technical Data ROEL-60N-2 Code 100372 Description SDS Plus Rotary Hammer Chuck SDS Plus Voltage 220 V~ - 240 V~ Frequency 50 Hz Current 7.2 A Power 2 Hp Impact Energy 6 Joules Drilling Capacity Concrete: 1-1/4” Metal: 1/2” Wood: 1-9/16”...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for Drills and Hammer Drills Choose the right bit While operating the hammer drill CAUTION • Choose the right bit for the work piece. • Use the auxiliary handles, if supplied with the tool. It reduces the risk of severe injury and makes the job easier. Loss of control may result in personal injury.
- Página 6 Parts Crankshaft Cap Vibration Shock Function Non-Slip Absorber Depth Selector Handle Control Rod Function Chuck Selector Blocking Button Trigger Switch 360° Auxiliary Handle Energy Indicator LED Power Cord Protector Power Cord Two Prong Wrench Assembly Dust Guard Depth Control Rod Steps 1 &...
- Página 7 Start Up Bit and Accessory Installation Bit with SDS-PLUS Shank • Clean and lubricate lightly the bit and / or accessory before installing. • Push the chuck jaw back while inserting the bit and / or accessory until stopping. Chuck •...
- Página 8 Start Up Drill with no impact Metal, wood or plastic can be drilled with the tool using drill / accessory bit three jaws chuck with an SDS adapter (NOT INCLUDED). • To install the three jaws chuck, go as with any other SDS accessory (page 7, drill / accessory Installation).
- Página 9 • However, the user shall add Lithium Complex Grease, ISO 220 Viscosity, N.L.G.I Grade #2 (for more information about the type of grease to use, please contact a Truper Authorized Service Center) every 2 to 3 days, and everyday if the load is heavy or when the impact seems to be weak.
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 . Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.