Hoover H-Energy 700 HE710HM Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. Main Cleaner
B. Bag Door
C. Exhaust Filter Cover
D1. Rotary knob control** with Auto Mode
. LED Display** with power control,
Auto and Manual modes, Bag Check
Indicator and Filter Cleaning Indicator
D3. Auto Mode Activation Button*
D4. Manual Mode Activation Button*
D. On/Off Pedal
E. Bag Check Indicator**
F. Cord Reel Pedal
G. Carry Handle
H. Bag
I. Bag Holder
J. Bag Door Release Latch
K. Hose
L. Intelligent Handle With Soft Grip,
and Integrated Dusting Brush*
M1. Suction Regulator*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release the hose: simply press the two latches on the hose end and pull. [1]
2. Connect the hose handle to the upper tube end. [2]
3. Connect the tube lower end to the carpet and floor nozzle** or accessories if
required. [3**]
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red mark. [6]
2. After connecting the telescopic tube lower end to Carpet and Floor Nozzle** or
accessories if required, press the floor type selector* pedal on the nozzle to select
the ideal cleaning mode for the floor type:
Hard Floor: Brushes are lowered to protect the floor.
Carpet: Brushes are raised for deeper cleaning.
*Certain Models Only ** May vary according to model
M. Telescopic Tube**
N1. Telescopic Tube Secure Connection*
N2. Telescopic Tube Adjuster**
N. Carpet and Floor Nozzle
Secure Connection*
O. Floor Type Selector Pedal
Q1. Nozzle Suction Control Slider
Q2 MIN Mode*
Q3. MAX Mode*
Carpet and Floor Nozzle (GP)**
R.
S1. Pre-Motor Filter Frame
S2. Pre-Motor Filter
T. Exhaust Filter
U. Tools Holder
V. Crevice Tool
W. Furniture Nozzle
X. Pet Hair Remover Mini Turbo Nozzle*
Y. Parquet Nozzle*
3. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster** up and raise or lower the tube to the most comfortable cleaning position.
[5**]
Carpet & Floor nozzle** :
- Hard Floor Cleaning: Press the pedal on the nozzle to switch to Hard Floor mode
and adjust the suction control slider on the nozzle to MAX (maximum). In this position
brushes are lowered to protect hard floors. [4a]
- Standard Carpet : Press the pedal on the nozzle to switch to Carpet mode and
adjust the suction control slider on the nozzle to MAX (maximum). In this position
brushes are raised. [4b]
- Long Pile Carpet: Press the pedal on the nozzle to switch to Carpet mode and
adjust the suction control slider on the nozzle to MIN (minimum) mode. It can also be
used to reduce the operating push force. [4c]
4. Switch the cleaner on by pressing the On/Off Pedal on the cleaner main body. [8]
AUTO MODE FUNCTION:
This vacuum cleaner features smart sensors able to detect the amount of dust and debris
on your floors and automatically adjust the power level. When the cleaner detects a big
quantity of dust it will increase the power, And when the cleaner recognizes the floor is
clean, the power will automatically decrease.
- For models equipped with rotary knob control: turn the rotary knob control on
AUTO MODE and the automatic function will be set. [D1]
- For models equipped with LED Display: the cleaner starts in AUTO MODE, on
display Auto Mode will be illuminated. To regulate the power level manually, press
MANUAL MODE Activation button on the control panel. [D3]
POWER LEVEL REGULATION:
- For models equipped with rotary knob control: Select the power setting by
turning the rotary knob on the cleaner or use the suction regulator on the handle.
[D1,9]
- For models equipped with LED Display: Press Manual Mode Activation Button
[D4] on the control panel, on the display MANUAL MODE will be illuminated. Then
you can press the manual button to choose the desired power setting or use the
suction regulator on the handle. [9]
5. Switch the cleaner off at the end of use by pressing the On/Off Pedal. Unplug and
rewind the power cord by pressing the cord reel pedal.
6. The tube can be parked for temporary storage while in use, or in the storage position
when not in use. [10]
2
GB