Publicidad
Idiomas disponibles
Idiomas disponibles
To adjust the Arc force push the knob until the icon
has the white arrow below it.
Arc Force is a technology that considerably facilitates the stability and continuity of the arc by increasing the output
voltage when the arc is in danger of going out, guaranteeing the continuity of the arc when there are movements of the
electrode, increasing or decreasing the arc distance, which in machines without this technology would mean an
interruption of the arc. The amount of force with which the machine will correct for changes in arc distance can be set on
a scale between 0 and 10.
TIG LIFT ARC PROCESS
For the TIG LIFT ARC process
thickness
, tungsten diameter
To adjust the current press the knob until the icon
has the white arrow below it.
KEEP WORKiNG
KEEP WORKiNG
Keep Working
in
, 3 parameterization menus are available: current
.
in
S i
6 1 3 0
S i
7 1 7 5
Turn the knob to set the diameter of the electrode to be
used and press the knob to save.
Then turn the knob to adjust the current.
1 8
X P S i
7 1 6 0
X P S i
7 2 0 0
in
, base material
in
X P
X P
Publicidad
