Steelcase Migration SE Guía Rápida página 22

4 Operating and adjusting
Resetting to factory settings
This function can be used to reset the system to the factory
settings.
EN
22
1. Press and hold the "1", "2" and "Up" buttons (for 3
seconds).
=
The display indicates S 0
2. Briefly press the "SAVE" button.
=
The display indicates: S 0 flashing.
3. Wait 3 seconds: Press the "Up" button until the
table is completely lowered.
=
The table is at the lowest position.
1. Press the "Up" button.
ü The system has now been reset to the factory
settings.