Steelcase Migration SE Guía Rápida página 8

2 Product description
Power consumption in standby mode
DMP 360 for Meeting Table 4-Leg
Up/Down control panel
Memory control panel
The type plate for the table (electric height adjustment) is
located under the table top, near the control panel
Further information can be found on the housing of the control
and on the columns.
Type plate: symbols – explanation
EN
8
Migration SE
Table & Bench & Meeting Table T-
LEG & Meeting Table 4-LEG
≤ 0.3 W
standard
optional (for Meeting Tables
standard)
Double insulation. Double insulated cables
minimise the risk of electrical shock.
For indoor use. Indicates that placing the
product outdoors is not allowed.
Read operator's manual. To indicate that
the operator's manual or card should be read
before continuing the operation.
Rated duty cycle. Maximum activation
time (time on) followed by a minimum deac-
tivation time (time off) necessary for the safe
operation of the furniture.
CE marking. Used to symbolise the
conformity of the product with the applicable
requirements that the European Community