J5create JUA210 Manual Del Usuario página 27

The Device driver software was installed properly, if you are going to install
more USB Display Adapters, repeat step A & B or restart computer
The functions of the USB Display Adapter will be activated after the
computer restarted. You might see the mirror display shown on the display
device.
You can modify the corresponding position of each extend display via
display settings.
Go to "START" → "Control Panel" → "Display Properties" →"Settings"
When Display Properties windows
appears, each monitor's number
can be identified by clicking "
" identify"
Drag the monitor to the location
you want.
26