Storage And Transport - ALFRA AKKU COMPACT Manual De Instrucciones

Punching time and punching capacity
22,5 mm Ø St. 37
63,5 mm Ø St. 37
68 x 68 mm St. 37
Maintenance
The device is designed to be maintenance free.
If the device should not build up pressure contact the distributor or the after-sales-service.

Storage and transport

After use put the punching unit back into the transport case. Store in a dry place.
Disposal
The disposal of the individual components must occur separately. The oil must be drained first and then disposed.
At disposal of all parts of the unit please respect the EC-Environmental-Norm.
Hydraulic oils pose a danger for the ground water. Uncontrolled drain or inappropriate
disposals are strictly forbidden.
The Battery must be disposed under special consideration of the battery directive.
The device must not be disposed as a complete unit into the residual / non-recyclable waste
because it could cause damage to the environment on the landfill.
A revocation of the used appliances through the manufacturer can be assured at a free
transmittal.
2 mm 5 sec. 190 Holes / Battery
2 mm 7 sec. 100 Holes / Battery
2 mm 7 sec. 70 Holes / Battery
17