INSTRUCTIONS
<Picture1>
<Picture2>
BATTERY CHANGE
ASSEMBLY INSTRUCTIONS
How to assemble the wheels.
-Insert the axis through the wheels and the
body,tighten by a cotter pin.
-Assemble the two wheel caps.
How to assemble the anti-tumble shelf.
-Place the anti-tumble shelf into the rear of the body.
-Assemble the two screws by a screwdriver.
How to assemble the steering wheel.
-Insert the fork post through the hole of the body.
-Place the steering wheel over the fork post.
-Insert the bolt into the hole and tighten with a
screwdriver.
How to assemble the toddler bar
-Place the toddler bar over the holes in the rear of the body.
-While holding the front of the vehicle down one hand push
firmly down on the toddler bar to seat the toddler bar into
the holes.Be certain the toddler bar is completely seated.
AA SIZE 1.5V
How to exchange the battery.
AA SIZE 1.5V
AA SIZE 1.5V
-Loosen the screws with a screwdriver.
Keep the screw in a safe place away
from children's reach.
-Put 3 AA batteries in the battery house.
-Then tight the screw with a screwdriver.