Publicidad
Idiomas disponibles
Idiomas disponibles
Open the loading door, place the laundry and put detergent, etc. Select the washing program,
temperature, spin speed and, if required, the auxiliary functions. Set the desired time by pressing
the Delay button. Press Start / Pause button. The delayed start time you have set is displayed.
Delayed start countdown starts. "_" symbol next to the delayed start time moves up and down on
the display.
Additional laundry may be loaded during the delayed start period.
At the end of the countdown, duration of the selected program will be displayed. "_" symbol will
disappear and the selected program will start.
CANCELING THE DELAYED START FUNCTION
If you want to cancel the delayed start countdown and start the program immediately:
Set the Delayed Start period to zero or turn the Program Selection knob to any program. Thus,
Delayed Start function will be canceled. The End/Cancel light flashes continuously. Then, select the
program you want to run again. Press Start / Pause button to start the program.
STARTING THE PROGRAMME
Press Start / Pause button to start the program. Program follow-up light showing the startup of the
program will turn on.
If no program is started or no key is pressed within 10 minutes during program
selection process, the machine will switch to turn off mode and the temperature,
speed and other lights will turn off.
CHILD LOCK
Use Child Lock function to prevent children from tampering with the machine. Thus, you can avoid
any changes in a running program.
If the Program Selection knob is turned when the Child Lock is active, "CL" appears
on the display. The Child Lock does not allow any change in the programs and the
selected temperature, speed and auxiliary functions.
Even if another program is selected with the Program Selection knob while the Child
Lock is active, previously selected program will continue running.
TO ACTIVATE THE CHILD LOCK:
Press and hold 1st and 2nd Auxiliary Function buttons for 3 seconds while any program is running.
The Child Lock is activated. If you press any button or turn the Program Selection knob when the
Child Lock is active, "CL" will appear on the display and blink 3 times.
TO DEACTIVATE THE CHILD LOCK:
Press and hold 1s t and 2nd auxiliary function buttons for 3 seconds while any program is running.
The Child Lock is deactivated.
In addition to the method above, to deactivate the Child Lock, switch the Program
Selection knob to On/Off position when no program is running, and select another
program.
Child Lock is not deactivated after power failures or when the machine is unplugged.
85
Publicidad
