Corghi 601 Manual De Uso página 42

WARNING
During work and maintenance operations, always tie back long hair and
do not wear loose clothing, ties, necklaces, wristwatches or any other
items that may get caught up in the moving parts.BRIEF DESCRIPTION
OF THE WHEEL BALANCER
This microprocessor control, the digital display and the high-performance wheel balancer
have been designed for balancing wheels weighing up to 65 kg. The machine can be
used for car, subcompact car and truck tyres. It can also balance special tyres (motorcy-
cles and racing cars); The ALU function allows the user to balance ALU rims with different
shapes.
Lightning symbol
This decal, placed on the rear of the machine, shows where to insert the power sup-
ply cable and tells the users that they must pay attention to their own safety.
Machine rotating part notice
This decal, placed next to the balancing shaft, reminds the user that that part
is rotating and therefore dangerous, that it cannot be touched. The arrow indi-
cates the direction of rotation.
Grounding symbol
This decal, placed on the rear left side of the machine, shows where to connect
the ground wire.
Original data
This symbol is located under the plate on the rear of the machine body
or in the inside on the front part or on the left side (in some machines it
is located only inside).
The three values, entered after calibration and before delivery (they are saved in the
CMOS chip) are to be used by the user for future reference.
42
INTENDED PURPOSE
Key to decals
(including warning decals)
Operator's manual @ 601