EN
Tap selection
The tap exit end face should be flat and
smooth, if not , file it to avoid leakage
Check the connection between
inlet hose connector and the
tap
is fastened.
if it leaks.
overstraining.
between inlet hose connector and the tap.
Make sure they are firmly fitted to prevent
dropping from improper installation
position.
Connect the inlet hose with the
washing machine
cushion. Please check if the cushion is
dropped or damaged before each usage. If
it is, contact the seller immediately.
connector.
gently to make sure if it is suitable.
Water inlet installation
Suitable tap
07
Not suitable tap