Publicidad
Idiomas disponibles
Idiomas disponibles
Install the Batteries and Cover
9
Insert four Alkaline AA batteries into the lock and cover them with the battery cover.
Reset the Lock
10
After installing the lock, you must perform the initialization process, as explained in the
steps below:
1)
Press and hold the Reset Button until you hear the audio prompt "Restore to default
settings, wait a moment".
2)
After a few seconds, the lock will prompt "Completed", which means the initialization
process is completed.
Note:
1)
Initialization will clear all the data and reset the appropriate lock direction.
2)
After initialization, the lock can be opened by any veri cation mode
(Fingerprint, Password or Card) until the rst Administrator is registered.
8
Publicidad
