ZKTeco AL40 Guia De Instalacion página 7

Install the Outdoor Assembly
5
There are two methods to install the Outdoor Assembly.
Method 1: Installation with Double-sided Tape
v
Paste the Double-sided Tape on the Mounting Plate of the Outdoor Assembly.
1)
Make sure that the highlighted Spindle is in the horizontal position, as shown below.
2)
3)
Route the cable through the opening below the bolt.
4)
Attach the Outdoor Assembly to the door by inserting the cable through the drilled
holes.
Method 2: Installation with Stud
v
Move the Gasket away and place the Stud on the Mounting Plate of the Outdoor
1)
Assembly.
2)
Make sure the highlighted Spindle is in the horizontal position, as shown below.
3)
Route the cable through the opening below the bolt.
4) Attach the Outdoor Assembly to the door by inserting the cable through the drilled
holes.
*
5