Publicidad
Idiomas disponibles
Idiomas disponibles
Adjust the Deadbolt (if needed)
3
Backset is the distance from the edge of the door to the center of the hole drilled on the
door. The default Backset length is 60mm, but if you want to adjust the Backset length to
70mm, grasp the body and twist the Faceplate as shown below:
Press the Bolt inside the Latch
60mm backset
By default, the metal shaft twists over the center as shown below:
Install the Deadbolt
4
Before installing the Deadbolt, make sure the Deadbolt is in retracted (unlocked)
1)
position and the arrow is facing upwards.
2)
Fix the Deadbolt with Screw A.
Rotate the Faceplate
UP
Screw A
Pull-out the Faceplate
*
4
Rotate it back
70mm backset
Publicidad
