Specific Safety Rules; Functional Description - Milwaukee 5366-21 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2.
Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3.
Keep hands away from all cutting edges and moving parts.
4.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE Service facility for a free
replacement.
5.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Double Insulated
Volts Alternating Current
Amps
No Load Revolutions per Minute
(RPM)
BPM
Blows per Minute
Underwriters Laboratories, Inc.
Canadian Standards Association
Mexican Approvals Marking
1.
Depth gauge
2.
Side handle
3.
Nameplate
4.
Trigger
5.
Handle
6.
Forward/Reverse switch
(on other side of tool)
7.
Hammer/Drill shift knob
8.
Chuck collar
9.
Dust shield
10. Bit (not included)
page 4

SPECIFIC SAFETY RULES

Catalog
Volts
Number
AC
5366-21
120
5368-21
120

FUNCTIONAL DESCRIPTION

2
1
10
Specifications
Drill Only
(steel or wood)
No Load
No Load
Blows/
Amps
RPM
Drill Bits
Minute
7.2
0 - 1100
0 - 5000
7.2
0 - 1100
0 - 5000
3
7
8
9
Rotary Hammer
(concrete)
Carbide-Tipped
Thin Wall
Twist
Percussion
Percussion
Bits
Core Bits
1/2"
5/32" - 7/8"
1/2"
5/32" - 7/8"
4
5
6
2"
2"

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5368-21

Tabla de contenido