Publicidad
Idiomas disponibles
Idiomas disponibles
partS anD featureS
1. Cut-off attachment
2. Lock-off button
3. Spindle lock button
4. Secondary Gripping Handle
4
1
2
Operating inStructiOnS
Warning:
while operating this power tool.
Warning:
use clamps or another practical way to secure and support the work piece
to a stable platform. Holding the work by hand or against your body leaves it unstable and may
lead to loss of control.
IMPORTANT: Refer to Power Unit instruction manual before operating this tool for all safety warnings
and details on installing and removing attachments.
ACCESSORIES
It is important to choose the correct guards, backing pads and flanges to use with accessories.
cautiOn:
Wheels and other accessories running over their rated accessory speed may fly apart
and cause injury. Accessory ratings must always be above tool speed as shown on attachment nameplate.
ASSEmbLY
Warning:
To prevent accidental operation, turn off tool and remove battery, or unplug unit,
before making any adjustments or removing or installing attachments or accessories. Failure to do
this could result in serious personal injury.
Warning:
Do not use this tool with toothed blades, grinding wheels, wire brushes, sanding
discs, or any other accessory not specifically mentioned in the following instructions.
mOUNTINg ANd REmOvINg gUARd
cautiOn:
turn off tool and remove battery, or unplug tool, before making any
adjustments or removing or installing attachments or
accessories.
cautiOn:
guards must be used with all cut-off
wheels. This tool is provided with a guard intended for use with
Type 1/41 cutting wheels only.
cautiOn:
Cutting wheel can be hot.
1. figure a - Open the guard latch (7), and align the lugs (9) on
the guard (6) with the slots on the gear case cover (10).
2. Push the guard down until the guard lugs engage and rotate
the guard couterclockwise in the groove on the gear case hub.
SaVe theSe inStructiOnS
8
3
Always use proper eye protection that conforms to ANSI Z87.1(CAN/CSA Z94.3)
5. Cutting wheel (2-7/8 inch diameter)
6. Guard
7. Guard latch
8. Hex wrench
5
5
7
6
6
6
4
3
2
A
3
7
1
9
2
10
1
Publicidad
