MSG Equipment MS900 Manual De Usuario página 13

The module's service menu (see Figure 8) contains:
1 - Buttons for manual control of the module's components.
2 - List of detected errors.
3 - Information about the current version of the module's software.
"Clear error" - button to clear errors.
"Update" - button to update the module's software.
1. Use the stand only for its intended purpose (see section 1).
2. The stand is designed for indoor use at temperatures ranging from +10 to +40 °C and relative
air humidity of 10 to 75% without condensation.
3. Modifying the design and electrical circuit of the stand is not allowed.
4. Turn off the stand when it is not in use.
5. In case of failures in the operation of the tester, stop further operation and contact the
manufacturer or sales representative.
WARNING! The manufacturer is not responsible for any damage or injury to human health
resulting from non-compliance with the requirements of this user manual.
Figure 8
5. INTENDED USE
English
User manual
13