MSG Equipment MS900 Manual De Usuario página 15

Figure 9. Position of CAMLOK connectors after installing the stand modules
The cleaning of the filter from soot is carried out through a 4-stage process:
1) Filter testing;
2) Washing;
3) Drying;
4) Re-testing the filter.
WARNING! When opening and closing the door of the washing chamber, always hold onto the
door handle to avoid injury.
Stage 1 - Filter Testing
During the first stage, the filter's permeability is checked. To do this, attach a suitable fitting
•
to the filter and connect a hose from the MS900A module to the filter's inlet. On the main
screen of the MS900A module, start the diagnostic mode (see item 2 in Figure 2). In the opened
window, press the "Start" button (see Figure 10).
6. FILTER CLEANING
English
User manual
15