Publicidad
Idiomas disponibles
Idiomas disponibles
4 - Function description
4.1- Operating functions
Diagrams
On/Off
View running
state
Adjust head
Lock / unlock
screen
Wake up
Adjusting method
Functions
After electric pump is installed and
powered on, after clicking the "On/
Off' key, he water pump can starts
running continuously; conversely,
the electric pump stops running.
ln the normal running state, click
the "Setting /
to switch back running and forth
among operating data, and stop at
the data to be displayed.
During the normal operating status,
press "Up / +" and "Down / -"
means to adjust the pipe network
pressure, the adjustable pressure
range of PX203E is from 10-60
meters.
ln the normal running state, Lock
screen: Press "Up / +" and "Down /
"simultaneously, all light turn off,
but only the screen Iock light turns
on. unlock: when locked screen
screen state, press and hold "Up /
+" and "Down / -" simultaneously
for 3s, the screen Iock station will
be cancelled, and other lights turn
on.
Press any key to wake up the
panel, and the panel will show
current operating station for 3s then
turn off automatically.
After electric pump runs
normally, the following
parameters can be viewed:
head: H (m).
" key repeatedly
Input power: P (W).
Input voltage: U (V).
Frequency: F (Hz).
Accumulated running days:
D (in day).
Software version: V.
Level display area One
bar is displayed for 10m,
two bars are displayed for
11-20m, three bars are
displayed for 21-30m, and
so on.
If any failure occurs,
corresponding fault lights
will turn on automatically.
If any failure occurs,
corresponding fault lights
will turn on automatically.
GB
Description
Publicidad
