Installation; Auto Channel Scan (Retune) Menu Operation - Nevir NVR-7502-26HD-N Manual De Instrucciones

To select the "Yes" or "No" option, highlight the item by
using " " or " " buttons and press OK button.
Afterwards the following OSD will be displayed on
the screen and the TV will search for both digital and
analogue TV broadcasts.
• Note: You can press
End of the search process, "Choose Region" osd will
be displayed on the screen (if any multiple region
variants are detected).Please select country and
region choice then press OK to continue.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
"Yes" and than press "OK".
"MENU" button to cancel.
• Press OK button to quit channel list and watch TV.

Installation

Press MENU button on the remote control and
select Installation by using " " or " " button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using "
"/" " button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using " "/" " and OK buttons.
Auto Channel Scan (Retune) Menu
Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analog and aerial
DVB stations.
• Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using ." " or " " and
OK button.
• After auto channel scan type is set and selected
and confirmed, installation process will start and
progress bar will move along. Press "MENU" button
to cancel process. In such a case, located channels
are not stored.
English - 99 -