Configuring Date/Time Settings; Configuring Source Settings; Configuring Other Settings; Operation - Nevir NVR-7502-26HD-N Manual De Instrucciones

• Press OK button while the Format Disk option
is highlighted. A menu will appear on the screen,
requiring you to enter a pin number. If you have not
changed the pin number, the factory default is 0000.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select "YES" and press OK to format the
hard disk. Select "NO" and press OK to cancel. Ensure
you back up important recordings before you format
the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using " " or " " key and press OK. USB
disk information will be displayed

Configuring Date/Time Settings

Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
• Use " " or " " buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
• Changes are automatically stored. Press
exit.

Configuring Source Settings

You can enables or disable selected source options. The
TV will not switch to the disabled source options when
SOURCE button is pressed.
• Select Sources in the Settings menu and press OK
button.
• Press"
• Use "
selected source. Changes are automatically
stored.

Configuring Other Settings

To view general configuration preferences, select Other
Settings in the Settings menu and press OK button.
MENU to

Operation

• Press "
• Use "
• Press OK button to view a sub-menu.
English - 113 -
" or " " buttons to select a source.
" or " " button to enable or disable the
" or " " buttons to select an item.
" or " " button to set an option.