3.3.5
Device setup options
• Open the appliance door, then press and hold down the number
button "2" on the control panel for 5 seconds.
• The buzzer will beep once and will go to the device settings
menu - the display will read "OP: -"
• Use the number buttons to select the desired setting option
according to the table below:
NOTE: Bold type is the factory setting.
Setting
1. Sound alarm.
2. Sound alarm volume.
3. Key sound.
4. Automatic response
to lack of action from
the user.
Option
Description
the
OP: 10
3x sound alarm.
OP: 11
Continuous
sound alarm.
OP: 12
5 repeated short
beeps.
OP: 20
Sound muted.
OP: 21
Quiet.
OP: 22
Average
volume.
OP: 23
Loud.
OP: 30
Off.
OP: 31
Turned on.
OP: 40
No response for
15 seconds in
standby, pause
or setting mode -
the unit goes
into
mode.
OP: 41
No response for
30 seconds in
standby, pause
or setting mode -
the unit goes
into
mode.
OP: 42
No response for
60 seconds in
standby, pause
or setting mode
- the unit goes
of
standby
standby